I cant seem to do it...
I rechecked the MySQL settings, i realy CHMODed all files to 755, but I get an internal server error (500) when I run install.cgi. Running pdesk.cgi tells me something more:
"install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC"
I checked on the PerlDesk forum, and one of the causes could be that the "DBI perl module" is not installed on the server. Is there a way to check that?
Installing PerlDesk 1.5.5 on www6
Moderator: Admins
Installing PerlDesk 1.5.5 on www6
Alexander
Alexander-
Please try to re-install your Perldesk software now. I just installed the DBD::Mysql module for perl so you should be able to run it now. In the future you will find a quicker response if you use our ticket system. You can register for it through <a href="http://www.prioritycolocation.com/cgi-b ... .cgi">this link</a>. Please let me know if you have any other issues.
-Matt
Please try to re-install your Perldesk software now. I just installed the DBD::Mysql module for perl so you should be able to run it now. In the future you will find a quicker response if you use our ticket system. You can register for it through <a href="http://www.prioritycolocation.com/cgi-b ... .cgi">this link</a>. Please let me know if you have any other issues.
-Matt
Hey thats great! Thank you!
I figured the module was already installed bacause PriorityColo also uses the PerlDesk system .. but I suddenly remember that's on another server ... I'll try to free up some time to install it, and I'll let you know here if it works
ps: Reason I posted here was because I figured there are more resellers using PerlDesk and I could have been doing something (stupidly) wrong... too bad no one replied. .. anyways thanks agin Matt!
I figured the module was already installed bacause PriorityColo also uses the PerlDesk system .. but I suddenly remember that's on another server ... I'll try to free up some time to install it, and I'll let you know here if it works
ps: Reason I posted here was because I figured there are more resellers using PerlDesk and I could have been doing something (stupidly) wrong... too bad no one replied. .. anyways thanks agin Matt!
Alexander